The Evaluation of the Power Output of a Locally-Developed Micro Thermal Power Plant in Nigeria

Authors

  • Afolabi Morakinyo Department of Food Science and Technology
  • Emmanuel Oluwaseyi Atofarati Department of Mechanical Engineering, Obafemi Awolowo University
  • Abraham Asere Department of Mechanical Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria

Keywords:

Power generation, Steam turbine unit, Biomass fired boiler, thermal power plant, Local content

Abstract

The erratic supply of electricity has been a fundamental problem confronting industrial development in Nigeria. Hence, the development of off-grid indigenous thermal power plant (TPP) using local content approach has become necessary. A new prototype TPP was developed, installed, and evaluated by considering three independent factors, biomass utility (20, 25, 30 kg), steam inlet pressure (5, 7.5, 10 bar), and flow-rate (120, 195, 270 cm3/sec).  The Box-Behnken design was adopted to generate seventeen runs of experiment. The experimental data were optimized using Response Surface Methodology (RSM) and validated using Desirability contour plots. The results showed that TPP generated electrical power of 1.2 kW with thermal efficiency of 51.25%. The experimental results and predicted RSM plots postulate run 9 as the optimum, with corresponding factors and responses of 25 kg, 10 bar, and  270cms-1 producing 245.5 V and 4.72 A for biomass utility, steam inlet pressure, flow-rate and voltage and current, respectively. The desirability model and plots validated RSM having variables of 25.04 kg, 10 bar, and 270 cm3/sec; 244.90 V and 4.60 A for biomass utility, steam inlet pressure, and flow rate; voltage and current, respectively at the desirability of 1.0. Thus the study establishes the possibility of developing off-grid TPP in Nigeria.

References

Adegboyega, G. A., and Odeyemi, K. O. (2011). Performance Analysis of Thermal Power Station: Case Study of Egbin Power Station, Nigeria. International Journal of Electronics and Electrical Engineering. ISSN 0974-2174 4 (3): 281-289.

Alessandro, R., Bonato, M., Epari Ritesh, P., Ludovic, G., & Carlo De, M. (2018). Hydropower future: Between climate change, renewable deployment, carbon and fuel prices. Water (MDPI: Switzerland), 10(11), 97. https://doi.org/10.3390/w10091197.

Arowolo W, Blechinger P, Cader C and Perez Y, (2019). Seeking Workable Solutions to the Electrification Challenges in Nigeria Minigrid: reverse auctions and institutional adaptation. Energy Strategy Reviews, 23: 114-141.

Ibrahim, T.K., Rahman, M.M., Mohammed, M.K and Basrawi, F, (2016). Statistical analysis and optimum performance of the gas turbine power plant. International Journal of Automobile and Mechanical Engineering (IJAME). 13(1): 3215-3225. DIO.org/10.15282/ijame.13.1.12016.8.0268.

IEA and World Bank, (2017). International Energy Agency (IEA) and the World Bank, “Sustainable Energy, World Bank Washington, DC.

Kareem, B., Ewetumo, T., Adeyeri, M. K., Oyetunji, A., & Olatunji, O. E. (2018). Design of Steam Turbine for Electric Power Production Using Heat Energy from Palm Kernel Shell. Journal of Power and Energy Engineering, 06(11), 111–125. https://doi.org/10.4236/jpee.2018.611009

Maryam, B., Ali, H., & Bahram, S. (2019). Susceptibility of hydropower generation to climate change: Karun III Dam case study. Water (MDPI: Switzerland) Switzerland, 11(5), 57. https://doi.org/10.3390/w11051025

Morakinyo, T. A., & Bamgboye, A. I. (2017). The Optimization of Operational Parameters of a Biomass Fire-in-tube Boiler Using Taguchi Design Method, 5(5), 167–175. https://doi.org/10.12691/ajfst-5-5-1.

Morakinyo, T. A. and Akanbi, C. T. (2021). “Model Identification of Biomass Boiler System Using Principal Component Regression”. FESTSCHRIFT in Honour of Engr. Prof. Patrick Obi Ngoddy at 80 Promethean Commentaries with Seminal Paper Contribution, Chapter 19, pp 326-338.

Olukanni, D. O. Adejumo T. A. and Salami, A. W. (2016). Assessment of Jebba Hydropower Dam Operation for Improved Energy Production and Flood Management ARPN Journal of Engineering and Applied Sciences, 11(13): 8450-8467.

Oluwatoyin, K. K., Oluwasegun, A. M., & Alabi, A. O. (2015). Modernization Technologies of Existing Thermal Power Plants in Nigeria, 8(x), 1–8. https://doi.org/10.9734/JSRR/2015/18874

Omontuemhen, Pedro; Wijeratne, D. (2016). Powering Nigeria for the Future, (July). Retrieved from www.pwc.com/gmc June, 6th, 2020.

Patrick, C., Mike, F., Luka, J., Nicholas, K., and Klaus-Dieter Eppsa T. (2015). Study Thermal Power in 2030; Added value for EU energy policy European Power Plant Suppliers Association. Pp 1-44. Retrieved from www.eppsa.eu. June, 6th, 2020.

Rasul M.G and Tappenden D. M. 2006. Assessment of the thermal performance of a coal-fired power plant boiler units, 3rd BSME-ASME International Conference on Thermal Engineering, Dhaka, Bangladesh

Rasul, M .G., Tanty, B. S., and Khan, M. M. K. 2006. Input-Output Method and the Heat Loss Energy Savings Opportunities in Iron and Steel Industry, Proceedings 2nd BSME-ASME International Conference on Thermal Engineering 2-4th January 2004, Dhaka, Bangladesh, Vol 2, pp.1116-1122

Rout, I.S. Gaikwad, A., Verma, V. K., and Tariq, M. (2013). Thermal Analysis of Steam Turbine Power Plants IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 7(2): 28-36.

Sambo, A., Garba, B., Zarma, I. H., & Muhammed, M. G. (2010). Electricity Generation and the Present Challenges in the Nigerian Power Sector. Researchgate, (May 2014).

Suojanen, S. (2015). Development of Concentrated Solar Power and Conventional Power Plant Hybrids. Tampere University of Technology, Germany.

Downloads

Published

2022-09-15

How to Cite

Morakinyo, A., Atofarati, E. O., & Asere, A. (2022). The Evaluation of the Power Output of a Locally-Developed Micro Thermal Power Plant in Nigeria. Ife Journal of Technology, 28(1), 18–27. Retrieved from https://ijt.ng/index.php/ijt/article/view/182