Technique for Automating DC Reliability Measurement of Multiple Metal-Insulator-Metal (MIM) Rectifiers
Keywords:
Metal-insulator-metal (MIM) rectifier, current-stressing, biasing, Mbed, microcontroller, I-V curveAbstract
An automatic biasing device for characterizing metal-insulator-metal (MIM) rectifiers is presented. The device shows a novel investigational and direct current test approach on MIM rectifiers, where tests are performed on multiple diodes for weeks at the same time, automatically, at specified time intervals and the raw data is saved for further analysis. The developed automatic biasing device makes it easy to determine the nature of the MIM diodes’ rectified current. The developed remote biasing device can also be used for effectively current-stressing multiple MIM diodes, making it a very versatile DC characterization device. Furthermore, the developed method was used to characterize the effect of epoxy encapsulation on the performance of MIM rectifiers with results comparable to the state-of-the-art.
References
Drullinger, R. E., Evenson, K. M., Jennings, D. A., Petersen, F. R., Bergquist, J. C., Burkins, L. & Daniel, H.U. (1983). 2.5 THz Frequency Difference Measurements in the Visible Using Metal-Insulator-Metal Diodes. Appl. Phys. Lett. 42, 137-138. https://doi.org/10.1063/1.93852
Siemsen, K. J., & Riccius, H. D. (1984). Experiments With Point-Contact Diodes in the 30-130 THz Region. Appl. Phys. Lett. A, 35, 177-187. https://doi.org/10.1007/BF00616972
Pan, Y., Powell, C. V., Song, A. M. & Balocco, C. (2014). Micro Rectennas: Brownian Ratchets for Thermal-Energy Harvesting, Appl. Phys. Lett. 105, 253901. https://doi.org/10.1063/1.4905089
Etor, D., Dodd, L. E., Wood, D. & Balocco, C. (2016). An Ultrathin Organic Insulator for Metal–Insulator–Metal Diodes. IEEE Trans. Electron Devices, 63(7), 2887-2891. https://doi.org/10.1109/TED.2016.2568279
Jung, M. H. & Choi, H. S. (2009). Characterization of Octadecyltrichlorosilane Self-Assembled Monolayers on Silicon (100) Surface. Korean J. Chem. Eng. 26(6), 1778–1784. https://doi.org/10.1007/s11814-009-0249-9
Kim, S., Sohn, H., Boo J. H. & Lee, J. (2008). Significantly Improved Stability of N-Octadecyltrichlorosilane Self-Assembled Monolayer by Plasma Pretreatment on Mica. Thin Solid Films, 515(6). 940–947. https://doi.org/10.1016/j.tsf.2007.05.092
Choi, K., Yesilkoy, F., Ryu, G. S., Cho, H., Goldsman, N. l., Dagenais, M. & Peckerar, M. (2011). A Focused Asymmetric Metal–Insulator–Metal Tunneling Diode: Fabrication, DC Characteristics and RF Rectification Analysis. IEEE Trans. Electron Devices, 58(10), 3519-3528. https://doi.org/10.1109/TED.2011.2162414
Etor, D., Dodd, L. E., Wood, D. & Balocco, C. (2016). High-Performance Rectifiers Fabricated on a Flexible Substrate. Appl. Phys. Lett. 109, 193110. https://doi.org/10.1063/1.4967190
